User Manual

Riverside - Multistage Drive
®
pg 2
Front Panel
• GAIN
Toggles between the low or
high gain channel.
• DRIVE
Adjusts the amount of
gain applied to the signal.
Employs continuously
variable circuit tuning
to adjust many circuit
parameters as you turn the
knob.
• BASS
Active shelving/parametric
low frequency control.
• FAVORITE
Used to recall a single stored favorite setting, which consists of all knob,
switch, and noise gate settings.
RED LED indicates that the Favorite setting is selected. Press and hold
Favorite switch for 2 seconds to save a new favorite sound.
COMPARE MODE
With FAVORITE on, LED turns from from RED to GREEN if current position is
identical to saved favorite.
• PUSH
Toggles between flat
or enhanced midrange
frequencies.
• LEVEL
Controls the output volume
level when the effect is ON.
• TREBLE
Wide-ranging high frequency
active shelf control.
• MIDDLE
Parametric mid boost/
cut control with optimized
frequency center.
• ON
Bypasses analog and digital
gain stages. Defaults to
relay based true bypass, but
can also be set to buffered
bypass mode in which the
volume pedal and boost
functionality are preserved.