User Manual

Riverside - Multistage Drive

pg 12

Use a TRS Expression pedal to control the knobs of Riverside

Expression Mode

NOTE: Expression pedal settings are global and will

affect both the manual and saved Favorite preset settings

on Riverside.

Press and hold both FAVORITE and ON

footswitches for a few seconds until

both LEDs begin blinking GREEN.

Connect the Expression pedal to the

EXP jack of Riverside using a TRS

cable.

Rock the expression pedal back to the

HEEL position and only the FAVORITE

LED will blink GREEN.

Set the knobs the way you would

like them to be in the HEEL position.

The FAVORITE LED will turn RED to

indicate that the setting has changed.

Rock the xpression pedal forward to

the TOE position and only the ON LED

will blink GREEN.

Set the knobs you would like to control

to the setting for the TOE position of

the expression pedal. The ON LED will

turn red to indicate that the setting

has changed.

Press the FAVORITE or ON footswitch

once to save the expression settings.