User Manual

COMPADRE - Dual Voice Compressor & Boost

pg 16

Step 3 – Set MIDI Output Mode

Press the BOOST or COMP footswitch again to set the MIDI output

channel and begin using Compadre.

TIP: A simple way to check that

communication is working is

to send CC #27 with a value of

127 when the COMP footswitch

is OFF. This will turn the COMP

footswitch on if MIDI is properly

connected and configured.

Determines whether Compadre will send MIDI data out.

Turn the COMPRESSION knob to select the MIDI OUT mode. The

COMP LED will flash momentarily to indicate status.

On: GREEN Using Compadre’s knobs and switches generates

MIDI messages that are sent out of Compadre. (Set to ON when

using MultiSwitch Plus.)

Through: AMBER Incoming MIDI messages are sent out of

Compadre without any additional MIDI messages generated by

Compadre.

Off: RED (default) No MIDI messages are sent out of Compadre.

Press and hold the

BOOST footswitch while

connecting power to

the pedal. Once both

LEDs flash, release the

footswitch.

MIDI Functionality - Configuring to Use MIDI (cont.)