User Manual

COMPADRE - Dual Voice Compressor & Boost

pg 15

Step 2 – Set MIDI Channel: This determines which MIDI channel

Compadre will use to send and receive MIDI data. To select channel

4-16, you will need to connect Compadre to a MIDI device.

Press the COMP or BOOST footswitch again to store the MIDI channel

and begin using Compadre.

Turn the BOOST knob to set the MIDI communication channel.

BOOST LED indicates status.

Channel 1: GREEN (default)

Channel 2: AMBER

Channel 3: RED

Channel 4 -16: BLUE (Requires 1⁄4” MIDI connection.)

Once the LED turns BLUE , it will blink until the pedal receives a

MIDI Program Change message. Once a message is received, the

pedal will be set to the MIDI channel that carried the message

and the LED will stop blinking.

Press and hold the

BOOST footswitch while

connecting power to

the pedal. Once both

LEDs flash, release the

footswitch.

MIDI Functionality - Configuring to Use MIDI (cont.)