User Manual

BigSky - User Manual
®
pg 21
Globals Menu (continued)
NORMAL
Dry Signal: Turns the dry signal on or off. This is useful in a parallel effects loop when an
effect level is necessary.
KILL
- dry signal is muted allowing the MIX control to be used as an effect level
OFF
Spillover: Allows the wet delay signal of a currently selected preset to “spill” into the next
selected preset. IMPORTANT: Because of the reverb buffer architecture, the
current preset must be active for at least 5 seconds before spillover will be
operational.
ON
OFF
EXIT
Preset Names: Enables or disables the display of preset names when displaying the current
bank. If set to ON or SCROLL, when incrementing through banks with the VALUE
ENCODER, the bank number will be displayed with 2 digits followed by the first 3
characters of the preset anme.
Preset Dump: Allows presets to be sent via MIDI to another BigSky or to a MIDI recorder
device. Presets can be dumped individually or all at one time. Select ALL to
dump all presets, or scroll to select an individual preset to send.
ON
ALL
SCROLL
PR 0A - 99C
- bank numbers are displayed instead of preset names
- the first 6 characters of the preset name are displayed
- the preset name will scroll once completely through it’s 16 characters
then settle on the first 6 characters
NOTE: If any of the above options do not appear in the GLOBLS menu, you may need to update
the firmware to the latest version. Visit the link below for instructions:
www.strymon.net/update