User Manual

Zelzah - Multidimentional Phaser

pg 27

MIDI Functionality – Configuring Zelzah to Use MIDI (cont.)

Step 3 – Set MIDI Out Mode: Determines what kind of MIDI data will be

sent out of Zelzah.

SWEEP

phase time

RESONANCE

SPEED

DEPTH DEPTH

VOICEMIX

SPEED

multidimensional phaser

classic

barber

env

o

mild

strong

Press and hold the ON

(4STAGE) footswitch while

connecting power to the

pedal. Once both LEDs flash,

release the footswitches.

Turn the MIX knob to select

what kind of MIDI data is

sent from Zelzah to other

MIDI devices. Both LEDs

will flash momentarily to

indicate status.

OFF: RED (default) - No

MIDI messages are sent

out of Zelzah.

THROUGH: BLUE - Incoming MIDI messages are sent to the MIDI

Out without any additional MIDI messages generated by Zelzah.

SEND CC PC OTHER: WHITE - MIDI CC, PC, and Sysex messages

generated by Zelzah are all sent to the MIDI Out.

SEND CC OTHER: GREEN - MIDI CC and Sysex messages

generated by Zelzah are sent to the MIDI Out.

SEND PC OTHER: PURPLE - MIDI PC and Sysex messages

generated by Zelzah are sent to the MIDI Out.

SEND OTHER: AMBER - Sysex messages generated by Zelzah are

sent to the MIDI Out

Press either footswitch to store the MIDI Out mode and exit.