User Manual

Zelzah - Multidimentional Phaser

pg 26

MIDI Functionality – Configuring Zelzah to Use MIDI (cont.)

NOTE: If you are only sending data to Zelzah using the Strymon MIDI

EXP Cable, the MIDI Output mode must be set to OFF.

(See page 27 for details on configuring the MIDI Output Mode.)

NOTE: A simple way to check that communication is working is to

send CC #10 with a value of 127 when the ON (4STAGE) footswitch

is off. This will turn the ON (4STAGE) footswitch on if MIDI is

properly connected and configured.

NOTE: MIDI Channel assignment is not saved per Favorite setting

or preset.

SWEEP

phase time

RESONANCE

SPEED

DEPTH DEPTH

VOICEMIX

SPEED

multidimensional phaser

classic

barber

env

o

mild

strong

Press either footswitch to store the MIDI channel and begin

using Zelzah.