User Manual

Zelzah - Multidimentional Phaser

pg 25

SWEEP

phase time

RESONANCE

SPEED

DEPTH DEPTH

VOICEMIX

SPEED

multidimensional phaser

classic

barber

env

o

mild

strong

MIDI Functionality – Configuring Zelzah to Use MIDI (cont.)

Step 2 – Set MIDI channel: This determines which MIDI channel Zelzah

will use to send and receive MIDI data. To select channel 4-16, you will

need to connect Zelzah to a MIDI device.

Press and hold the ON (4STAGE) footswitch while connecting

power to the pedal. Once both LEDs flash, release the footswitch.

Turn the SPEED

(4STAGE) knob

to set the MIDI

communication

channel. ON (4STAGE)

LED indicates status.

SPEED knob selections:

Channel 1: GREEN (default)

Channel 2: AMBER

Channel 3: RED

Channel 4-16: BLUE (Requires 1⁄4” MIDI connection.)

Once the LED turns BLUE, it will blink until the pedal receives a MIDI

Program Change message. Once a message is received, the pedal

will be set to the MIDI channel that carried the message and exit the

power-up mode to start using Zelzah.