User Manual

Zelzah - Multidimentional Phaser
pg 22
External Control – Using MultiSwitch Plus
Selecting and saving Zelzah presets using MultiSwitch Plus.
Step on a switch that is not illuminated to recall the
corresponding preset.
Step on an illuminated switch to bypass Zelzah.
Saving Zelzah presets with MultiSwitch Plus:
Dial in the sound that you would like to save as your preset
on Zelzah.
Press and hold the ON (4STAGE) footswitch on Zelzah until
the ON (4STAGE) LED blinks BLUE.
Press the A, B, or C footswitch on MultiSwitch Plus to save
the current state of the pedal to the desired location.
Preset 1 Preset 2 Preset 3
1
1
2
2
3
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to
MIDI program changes 1, 2, and 3.