User Manual

Zelzah - Multidimentional Phaser
pg 19
External Control – Favorite Switch Setup and Compare Mode
Connect MiniSwitch or other external latching footswitch with a TRS
cable to store and recall your favorite setting.
Step on the external footswitch
to toggle between your Favorite
setting and the current setting on
Zelzah.
Configure the EXP/MIDI
jack for Favorite mode.
(See page 15 for more info.)
Connect an external switch
with a TRS cable to the
EXP/MIDI jack.
Dial in your desired sound.
To save your sound as
the new Favorite setting,
press and hold the ON
(4STAGE) footswitch for
until the ON (4STAGE) LED
blinks BLUE. Press the ON
(4STAGE) footswitch again
to save the Favorite setting.
1
2
3
4
INPUT
MONO
IN OUT L OUT R
STEREO
USB
OR
COMPARE MODE
With the Favorite engaged, as
a knob or switch is adjusted,
the ON (4STAGE) LED flashes
GREEN when the current knob or
toggle switch position matches
the setting of the saved Favorite
setting.
NOTE: Along with the knobs
and toggle switches on the
face of the pedal, all Live
Edit settings and the bypass
state of 6-Stage and 4-Stage
are stored with the Favorite
setting. Power Up modes are
not stored with the Favorite
setting.
NOTE: Saving presets works
differently when using MIDI.
(See page 28 for more details.)
NOTE: The Favorite setting is
stored at MIDI program change
location 0.