User Manual
Zelzah - Multidimentional Phaser
pg 17
INPUT
MONO
IN OUT L OUT R
STEREO
USB
RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
Use a TRS expression pedal to control the knobs of Zelzah.
External Control - Expression Pedal Setup
Connect an expression pedal to the EXP/MIDI jack of Zelzah
using a TRS cable.
Configure the EXP/MIDI jack for Expression mode.
(See page 15 for configuration instructions.)
Press and hold both footswitches until both LEDs blink GREEN.
Rock the expression pedal to the HEEL position. Only the ON
(4STAGE) LED will blink GREEN.
Set the knob(s) you would like to control to the desired settings for
the HEEL position of the expression pedal. Only the ON (4STAGE)
LED will turn RED.
2
1
3
4
5