User Manual

Zelzah - Multidimentional Phaser

pg 15

Power Up Modes – Configuring the EXP/MIDI Jack

Set the functionality of the EXP/MIDI jack.

SWEEP

phase time

RESONANCE

SPEED

DEPTH DEPTH

VOICEMIX

SPEED

multidimensional phaser

classic

barber

env

o

mild

strong

Press and hold the ON (4-Stage) footswitch while powering up the

pedal. Once both LEDs flash, release the footswitch.

Turn the SPEED (6-STAGE) knob to select the function of the EXP/

MIDI jack. ON (6-STAGE) LED will change color to indicate the

current status as the knob is turned.

Expression Pedal mode: GREEN (default) - Allows continuous

control over any of the knobs in any direction with a standard TRS

expression pedal. (See page 17 for details.)

Favorite mode: AMBER - Allows you to recall a Favorite setting

using a Strymon MiniSwitch. (See page 19 for details.)

Tap mode: RED - Allows you to control the SPEED of the 6-Stage

phaser with TAP tempo using a Strymon MiniSwitch.

MIDI mode: BLUE - Allows for the selection of three presets

using a Strymon MultiSwitch Plus. Full MIDI functionality is

available by sending MIDI Program Change messages via 1/4”

MIDI connection using a Strymon Conduit or MIDI EXP cable. Up

to 300 presets are available via MIDI.

(See page 22 for MultiSwitch Plus or page 23 for MIDI.)