User Manual

Zelzah - Multidimentional Phaser
pg 13
Power Up Modes – Input Level
Select the input level to the effect processing.
Press and hold the ON (6-STAGE) footswitch while connecting
power to the pedal. Once both LEDs flash, release the footswitch.
Turn the SPEED (4STAGE) knob to select the Input Level mode.
The ON (4STAGE) LED will change color to indicate the current
status as the knob is turned.
Instrument: GREEN (default) - Input headroom set for guitar
level source.
Line: RED - Use with line level source, such as a keyboard or
synthesizer. Adds 10dB of headroom.
Press either footswitch to store the Input Level mode and begin
using Zelzah.
1
2
3
SWEEP
phase time
RESONANCE
SPEED
DEPTH DEPTH
VOICEMIX
SPEED
multidimensional phaser
classic
barber
env
o
mild
strong
NOTE: Input Level is persistent across power cycles and is not
saved per preset.