QUICK START GUIDE
WELCOME TO CONDUIT GETTING STARTED Conduit is a premium, easily configurable, ultra-reliable MIDI interface that will work with most 1/4" MIDI equipped effects pedals. It also offers the best USB computer connection available for TRS MIDI pedals. SMART MIDI DISTRIBUTION Each of Conduit’s four bi-directional 1/4" TRS jacks are independently configurable to work with a variety of 1/4" MIDI communication modes. Enjoy easy configuration with no DIP switches, custom cables, or screwdriver required.
CONNECTING YOUR 1/4" MIDI DEVICES TO CONDUIT 1 2 Connect a power supply (not included) that provides 9V DC center-negative power and at least 50mA of current to the 2.1mm 9VDC power input. 4 When Conduit powers up, the LEDs will light up to show that the device is powered. The color of the four 1/4" OUTPUT LEDs will show the current I/O configuration. The factory default I/O configuration for all four 1/4" TRS jacks is NORMAL mode (GREEN - Tip send). This is the configuration used by Strymon pedals.
ADDITIONAL INFORMATION USING CONDUIT WITH A COMPUTER When USB is connected, the computer will recognize 6 MIDI I/O ports. • Conduit MIDI Ports 1-4 correspond with the 1/4" TRS jacks numbered 1-4. • Conduit MIDI Port 5 corresponds with the 5-DIN MIDI IN/MIDI OUT ports. • Conduit MIDI Port 6 will appear as a background USB communication port.
CONDUIT MOUNTING INSTRUCTIONS Conduit features built-in threaded hardware for easy mounting on the top or bottom of most pedalboards. 1 CHOOSE YOUR MOUNTING LOCATION Tape the Drill Template (included in this box) logo side up in the location you want to install your Conduit. This illustration shows mounting on the top of your pedalboard. HOLE LOCATIONS DRILL TEMPLATE #4 SCREWS 2 DRILL HOLES Drill through the two marked hole locations with a 1/8" (3mm) bit.
strymon.
