User Manual

Lex - rotary User Manual
®
pg 5
Power up settings
PREAMP
DRIVE
FAST ROTOR
SPEED
BYPASSSLOW/FAST
®
rotary
MIC DISTANCE
HORN LEVEL
HOLD BOTH AT POWER UP
STEREO BI-AMP
BI-AMP: While holding both
footswitches at power up, turn
PREAMP DRIVE fully clockwise
for Bi-Amp ON. When in BIAMP
mode, the Left output is the horn
signal and the Right output is the
woofer signal. For Bi-Amp OFF
(stereo mode), turn PREAMP
DRIVE fully counterclockwise.
GUITAR AMP
FULL RANGE SPEAKER
EXP
PEDAL
FAV
SWITCH
CAB FILTER: Tailors the cabinet
lter for best use either in front
of a guitar amplifi er or a full
range speaker system. While
holding both footswitches at
power up, turn MIC DISTANCE
fully counterclockwise for use
with a GUITAR AMP. Turn MIC
DISTANCE fully clockwise for
use with a FULL RANGE speaker
system, e.g. studio monitors.
Full range mode is also useful
for direct recording.
EXP INPUT ASSIGN: Assigns
the EXP pedal input jack to
use an expression pedal or a
Favorite switch. While holding
both footswitches at power up,
turn FAST ROTOR SPEED fully
counterclockwise for use with an
expression pedal. Turn knob fully
clockwise for use with a Favorite
Switch to save a favorite setting.
Turn knob to the middle position
to use a Favorite switch to toggle
between FAST and SLOW rotor
speeds.
EXTERNAL
SPEED SWITCH
When a knob is
adjusted, LEDs will
light up to indicate
which selection has
been made for each
start up setting. For
a counterclockwise
setting the SLOW/
FAST LED will light.
For a clockwise
setting the BYPASS
LED will light. For
a mid knob setting
both LEDs will light.