User Manual
Lex - rotary User Manual
®
pg 4
EXP
INPUT
9VDC
+
-
RIGHT OUTLEFT OUT
FAVORITE
®
TRS
OR
High impedance
mono input.
Stereo outputs. Use LEFT
OUT for mono signal output.
If using in BI-AMP mode, the
Left out is the horn and the
Right out is the woofer.
Connect a standard TRS expression
pedal for continuous control over
any selectable knob parameter. To
select the knob controlled by the
expression pedal, hold the SLOW/
FAST footswitch during power up.
The fi rst knob turned is then then
assigned to the expression pedal.
The maximum position the knob is
turned up to becomes the expression
pedal “toe down” maximum value.
Moving the pedal to the “heel
down” position activates the rotor
brake when the expression pedal is
assigned to control speed.
Rear Panel
Standard 9V DC center
negative power input.
250 mA available
current required.
Connect a Favorite Switch to save
your favorite setting or to toggle slow/
fast speeds remotely. To use a Favorite
switch, see page 5 for a detailed
explanation of set up.