User Manual
DIG - Dual Digital Delay User Manual
®
pg 9
Kill Dry Mode
DIG can be set up to mute the dry signal, useful for Parallel effects loops.
To change this operation, hold down both TAP and BYPASS footswitches
while powering up. While holding down, turn the TIME knob to one of two
ranges shown below.
HOLD BOTH AT POWER UP while turning the TIME
knob to change the Kill Dry mode.
KILL DRY OFF
Set here to disable Kill Dry.
Kill Dry Off is standard operation.
KILL DRY ON
Set here to enable Kill Dry. This
will mute the dry signal, allowing
the MIX and MIX 2 controls to be
used as effect levels.