User Manual

17
Handpiece Adjustment Screen
Select a Handpiece Option icon from the MAIN OPTION
screen to access this screen.
NOTE: For quick access to this screen, touch the
handpiece title displayed at the top of any handpiece
screen. And return to the handpiece screen by
touching the handpiece title displayed on this screen.
Depending on the type of handpiece, one or more of
the following options will be available.
Select BRAKE, ACCEL, TURNS, WATER or AUX then
press the arrow icons to change the setting.
Brake: At 100%, the handpiece stops abruptly.
Deceleration slows as the setting nears zero.
Accelerate: At 100%, handpiece speed
accelerates quickly. Acceleration slows as the
setting approaches zero.
Turns: Use to set the number of turns per
direction when running a handpiece in the
oscillate mode. The minimum setting will set
the oscillate function to operate in a TIME-
BASED mode where the number of turns are
based on the speed of the handpiece.
Water: At 100%, irrigation volume is greatest.
Volume decreases as the setting approaches
zero.
ATTACHMENT: Use the arrow icon on the left to scroll
through the list of attachments. Select the attachment that
is assembled to the handpiece by stopping on it.
Selecting the proper attachment will optimize the perfor-
mance of the handpiece for the attachment and display
the appropriate speed scale on the handpiece screen.
RUN MODE: Use the RUN MODE toggle button to
scroll through the options and stop on the desired
setting.
Variable: Handpiece speed responds to the
degree of pressure applied to the handswitch.
Nonvariable: Handpiece speed runs at the
maximum setting only. Varying pressure on
the handswitch does not vary the handpiece
speed.
One touch: Toggle the handpiece on and off
with a single touch of a trigger device. The
trigger device can be the handswitch or
handpiece trigger buttons.
BUTTON: See Handpiece Button Mapping.
FOOTSWITCH: Activates FOOTSWITCH
ADJUSTMENTS. See Footswitch Adjust-
ments.