User Manual

14
Depress the mode icon and set the maximum speed
using the adjustment arrows. Speed settings are
individually selected for each mode.
Default speed settings and incremental steps are
specific to each handpiece.
MODES
Operation in high speed mode.
Operation in oscillate mode.
Operation in low speed mode.
The Stryker Endoscopy and Leibinger Handpiece Screen
The oscillate mode is selected and Set Speed is set at 1,800 RPM.
TPS1, TPS2 and the footswitch icons indicate that other instruments are plugged
into the console.
WARNING: Read and understand
the Stryker Endoscopy handpiece
instructions.
If instructions were not supplied with your
handpiece, refer to the appropriate Stryker
Endoscopy Operating and Maintenance
Manual listed below.
Handpiece Manual
272-704 1000-400-120
275-701 1000-400-034
275-705 1000-400-034
275-601 1000-400-034
290-601 1000-400-288
IMPORTANT INFORMATION
The hand-controlled Endo Shaver can be
controlled by the footswitch or by the hand-
control buttons built into the handpiece.