User's Manual

DRAFT
10
PROBLEM
AC charger/adaptor plug will
not fully insert into the
charger jack.
Charge indicator does not
illuminate when the adaptor/
charger is plugged into the
radio or supplemental
battery.
Static or interference.
Messages not transmitted.
CAUSE
Damaged component.
Power strip is turned off.
Charger not plugged in.
Charger defective.
Talk range has been
exceeded.
Low Battery
Master radio has been
turned off.
Radios are not from the
same matched set.
Master radio is out of range.
One or more batteries are
expended.
SOLUTION
Return to Stryker for repair.
Reset power strip toggle
switch.
Check electrical connections.
Return to Stryker for repair.
Keep team members within
operating range.
Recharge battery or use
supplemental battery.
Turn all radios off. Turn
master radio on. Wait 15
seconds then turn on remote
radios.
Confirm radios have the
same code
Make sure is in proximity to
other radios.
Use supplemental battery or
recharge batteries.
Troubleshooting Guidelines
This product is not field repairable. In case of operating difficulties, return this product to Stryker Instruments for repair. For more
information, contact your Stryker sales representative or call Stryker Customer Service at 1-800-253-3210.