Use Instructions

Table Of Contents

RReeffeerreenncceess

IInnssppeeccttiioonn aanndd MMaaiinntteennaannccee

WWAARRNNIINNGG

• Upon initial receipt and before each use, inspect equipment for damage. Do not use any

equipment if damage is apparent or the inspection criteria are not met.

• Do not disassemble, modify, service, or repair any equipment without the authorization of the

manufacturer. Failure to comply may result in electric shock or fire. For assistance, contact

Stryker.

NNoottee

• Only biomedical equipment technicians trained and experienced in the maintenance of this

reusable medical device should inspect and maintain this equipment.

• Always dispose of equipment properly, see

Disposal/Recycle

(page 21).

Upon initial receipt and before each use, inspect the following:

• Power cord for damage, bent pins, and cuts

• Cradle housing for damage and cracks

• Equipment damage or missing components

• Cradle vent holes for obstructions

• Equipment for corrosion, discoloration, pitting, cracked materials, or unacceptable

deterioration on any external surfaces, including on-product labels

• [Stand Configuration] – Inspect casters for damage and obstructions

• [Stand Configuration] – Verify locking casters function properly

If inspection criteria are not met or damage is apparent, do not use the equipment and replace the

damaged equipment, see

Service

(page 19).

SSeerrvviiccee

WWAARRNNIINNGG

• Do not disassemble, modify, service, or repair any equipment without the authorization of

Stryker. Failure to comply may result in electric shock or fire. For assistance, contact Stryker.

• Always process contaminated equipment, before returning equipment to Stryker, see

Cleaning

and Disinfection

(page 18). Stryker will not accept or process any contaminated equipment.

NNoottee

• Maintenance documentation is only available to Stryker-authorized service personnel, for

assistance contact Stryker.

• Always contact your local Stryker Service Center to obtain a repair purchase order before

returning a product to the service center.

700001138880 Rev-AC 19 EN