User's Manual
EN-43
DRAFT
Icon Name/Term Description
CROSSFLOW FOOTSWITCH Programs the settings for the CrossFlow footswitch
iSWITCH FOOTSWITCH Programs the settings for the iSwitch footswitch
CROSSFIRE FOOTSWITCH Programs the settings for the Crossre footswitch
FORMULA SHAVER� Programs the settings for the Formula Shaver
USER PREFERENCE Loads User Preference les
USB UPLOAD Uploads/saves user preference settings from/to USB drive
RIGHT ARROW Moves a le to the right screen
LEFT ARROW Moves a le to the left screen
SEND PREFERENCE FILE TO
CROSSFIRE
Sends a preference le to the Crossre system
SETTINGS Navigates to the Settings screens
GENERAL SETTINGS Adjusts the volume, brightness, and language
VOLUME Adjusts the volume of pump
BRIGHTNESS Adjusts the monitor brightness
SOFTWARE UPGRADE Loads new software upgrades from a USB drive
ACTUAL PRESSURE DISPLAY
ICON SELECTION
Selects the Actual Pressure Display icon
STRYKER SETTINGS Password-protected settings, for Stryker use only
— FLOW The uid entering and exiting the joint; keeps the joint space
clear by removing loose tissue, debris, and uid from the joint�
— FLOW LIMIT The maximum ow rate�
— FLOW RATE The speed at which uid enters and exits the joint; measured
as volume over time, or liters per minute (L/min)�
— PRIME To remove air from the inow tubing prior to pumping uid
through the tubing�
— SUCTION The force required to pull loose tissue, debris, and uid from
the joint�