User's Manual

EN-24
The Crossfire™ Interface
1 3 42
Control Description See
1. Menu The Menu button sets user and
system settings.
“Adjusting User and
System Settings”
2. LCD screen e LCD screen displays system
status, error codes, mode of
operation, cutting speed, and power
levels.
“Reading the LCD
Screen”
3. Select e Select button toggles between
RF and Shaver controls. e selected
device can then be controlled using
the Crossre™ interface.
“Selecting Between
RF and Shaver
Modes”
4. Adjust e Adjust buttons increase/decrease
speed and power settings for the
selected device.
“Adjusting Power
and Speed Settings”