Users Manual

Nest Case V1
Instructions for Use
Copyright © 2020 STRYDE. All rights reserved.
2
1. Safety Information
The following general safety precautions must be observed during all phases of operation of
this product.
WARNING
Do not use the device if it appears damaged or defective.
Do not dismantle or try to repair a broken unit.
Do not perform any unauthorized modification or change to the device.
Do not expose to excessive heat or flames.
Do not use main power cords that are inadequately rated.
CAUTION
Dropping the device and other mechanical abuse may cause damage to
sensor, electronics and mechanical parts.
Failure to comply with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of the product. STRYDE
assumes no liability for the customer’s failure to comply with these requirements.
For further information on safety, please refer to the STRYDE Operation Support Product File.
2. Certification
This product is designed for use in compliance with, and is certified according to, the following
certification rules:
LVD (2014/35/EU)
EN 61010-1+A1:2019
EMC (2014/30/EU)
EN 61000-6-2:2005
EN 61000-6-4:2007 + A1:2011
EN 61000-3-2:2014
EN 61000-3-3:2013
RED (2014/53/EU)
EN 303 417 V1.1.1 (2017-09)
EN 303 446-2:V1.2.0 (draft – 2019-03)
RoHS (2011/65/EU)
N/A
IECEE CB
EN 61010-1+A1:2019