Product Manual

Page 5 of 13
 Do not use the fan where there is a risk of causing a fire or an explosion; e.g., in the presence of
flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable
liquids, gases, or dust.
 Keep children and bystanders away from the work area while operating the fan. Do not allow
children to handle the tool.
⚠WARNING
PERSONAL SAFETY
 Stay alert, watch what you are doing, and use common sense when operating the fan. Do not use
the fan while you are tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating the tool may result in serious personal injury.
 Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
 Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant
safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust
mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection
systems, and hearing protection when appropriate. This applies to all persons in the work area.
 Do not overreach. Keep proper footing and balance at all times.
 Do not use the tool when tired or under the influence of drugs, alcohol or medication.
 Ensure the power switch is off prior to plugging in the tool.
⚠WARNING
ELECTRICAL SAFETY
 Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
⚠CAUTION
FAN USE AND CARE
 Check for damaged parts before each use. Carefully check that the fan will operate properly and
perform its intended function. Replace damaged or worn parts immediately. Never operate the fan
with a damaged part.
 Do not use a fan with a malfunctioning switch. Any fan that cannot be controlled with the power
switch is dangerous and must be repaired by an authorized service representative before using.
 Disconnect the power from the fan and place the switch in the locked or off position before making
any adjustments, changing accessories, or storing the fan. Such preventive safety measures
reduce the risk of starting the fan accidentally.
 Surges in electrical power or excessive heat may cause the fan to turn off. Wait approximately 15
minutes for the fan to resume operation.
 Store the fan when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the fan for good working condition prior to storage and before re-use.
 Keep guards in place and in working order. Never operate the fan without the guards in place.