Product Manual
Page 6 of 10
⚠CAUTION
BEAM CLAMP USE AND CARE
Do not force the beam clamp. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the beam clamp will operate
properly and perform its intended function. Replace damaged or worn parts immediately. Never
operate the beam clamp with a damaged part.
Store the beam clamp when it is not in use. Store it in a dry, secure place out of the reach of
children. Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your beam clamp.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in place.
Specific Operation Warnings
⚠WARNING
DO NOT change or modify the beam clamp
DO NOT exceed the rated load capacity.
Never remove the hook safety catches.
Never use the hoist to transport people or animals.
DO NOT allow the load to swing.
Do not use the beam clamp for a purpose or in an area for which it is not intended.
Keep persons and property clear from under the load.
Before Each Use
Safety Checks
1. Handle the beam clamp by its structure or by the devices provided for this purpose.
2. The clamp should be installed only by a competent technician.
3. Use only original replacement parts that are compatible with the type of clamp being repaired.
4. Ensure the clamp is fitted correctly over the center of gravity of the item being lifted and will not be
subjected to side loading.
5. Before lifting a load, ensure that the clamp has been tightened and that the lifting appliance is
fitted correctly into the eye of the clamp.
6. Keep the beam clamp clean and all moving parts lubricated.