Product Manual

Page 7 of 10
Note that both the Charged and Charging lights on the controller may flicker during connection;
this is normal.
Note: Do not connect the battery cables directly to the solar panels.
Do not connect any power supply directly to the solar panels.
5. As the system charges, observe the indicators on the controller:
The Charging indicator light illuminates in yellow when the battery charge is below 13 volts.
The controller cuts-in and charging begins.
The Charged indicator illuminates in green when the battery charge is at 14.2 volts meaning
the battery is fully charged. The controller cuts-out and charging stops.
6. When disconnecting the system, cover the solar panel to prevent arcing during disconnection,
then disconnect the solar panel first, then the battery.
After Each Use
• Clean the controller, solar panel, battery clamps and other parts of dirt and debris to prepare it for
the next use. Wipe the components with a damp cloth but DO NOT use soap or solvents.
• Dry the components so that no moisture remains to possibly corrode the electrical connections.
Store the controller and other system components when it is not in use. Store them in a dry, secure
place out of the reach of children. Inspect the components for good working condition prior to storage
and again before use.
Maintenance
The controller requires no maintenance except occasional cleaning and replacement if damaged or
worn.