Product Manual

Page 4 of 10
Intended Use
This charge controller is used to regulate power from a solar panel, to a 12V battery. The controller
handles up to 12 amps and also prevents overcharging, high-voltage surges, and reverse current.
Technical Specifications
Important Safety Information
• Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this charge
controller. Always be aware of the environment and ensure that the tool is used in a safe and
responsible manner.
• Do not allow persons to operate or assemble the controller until they have read this manual and
have developed a thorough understanding of how it works.
• Do not modify this controller in any way. Unauthorized modification may impair the function and/or
safety and could affect its life. There are specific applications for which the controller was
designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
do the job better and more safely at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
• Do not wear dangling objects or jewelry when working with electrical equipment.
• Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant
safety glasses with side shields.
• Do not overreach. Keep proper footing and balance at all times.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
Property Specification
Max. Amps 12
Max. Power 180W
Cut-in Voltage 13
Cut-out voltage 14.2