2200 lb. Semi-Electric Stacker Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, the warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This stacker is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Specific Operation Warnings ............................................................................................................... 5 Before Each Use ....................................
Intended Use This Strongway Semi-Electric Stacker is used for short distance pallet stacking and transporting. Transporting requires manual pushing or pulling. The stacker has features which include: reduced energy costs, easy and safe operation, low noise, and no pollution. The stacker is designed for stacking and handling loads or pallets ONLY on flat, hard, level surfaces.
⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the stacker. Do not use it while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Do not press the lift or lowering buttons while the stacker is moving. Quickly switching the two buttons may cause damage to the stacker. Do not load heavy goods onto the forks quickly. Use steady motions when loading. Before moving, assure that the load is centered and secured with a load restraining device. Do not allow people to sit on ride stacker. Do not use to transport people or animals. Do not operate with stacker in the raised position.
lowering a load. Batteries contain acid! When handling batteries, ALWAYS wear approved safety goggles, rubber gloves, and protective clothing that are able to protect you from the acid. Acid can cause burns and injury. Risk of fire can occur when working with batteries. Avoid any open flame, smoking, or any flammable situations when handling batteries! Before each use, check to make sure the stacker is in proper working condition. Check the moving parts, hydraulic hoses, wheels, etc.
Turn on the electrical source, unlock the electric door lock, and move the stacker near the shelf or rack (keep the front of the fork at a minimum of 12 inches from the goods shelf or rack). Press the lowering button, adjusting the height of the forks to a proper position, and insert the forks slowly and as deeply as possible into the pallet. Press the lifting button until the fork is at a minimum of 4 inches from the shelf or rack.
Troubleshooting No. Issue Possible Cause Possible Solution ① Overload Reduce the load ② The pressure of the overflow valve is too low Internal abnormal leakage in the lifting oil cylinder Insufficient hydraulic oil Adjust the pressure higher Insufficient voltage of the storage battery The power switch has not been turned on.
Parts Diagram Parts List Part No. 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Handle Retaining Ring Shaft Spring Pump Hose Voltage Meter Screw Key Button Button Washer Washer Screw Cover Retaining Ring Washer Bearing Wheel Lock Quantity 1 10 1 1 1 1 1 1 1 1 1 2 8 6 1 4 4 4 2 1 Part No.
Part No. 22 23 24 25 26 27 28 29 34 35 36 37 38 39 43 44 45 46 49 Description Wheel Frame Bearing Shaft Nut Washer Bearing Washer Bearing Nut Battery Washer Bearing Wheel Shaft Tie-In Washer Valve Voltage Meter Lining Quantity 2 2 2 8 2 2 2 2 4 2 4 4 2 2 1 1 1 1 1 Part No.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
