Product Manual

4. Insert the front legs (9) into the support base (4).

5. Temporarily insert bolt (1) into each of the corresponding support base holes (4) that align with the

legs. This will keep the structure ridged while installing the main post (2).

6. Attach the main post (2) with bolt (1), washer (17) and nut (15).

7. Attach the support rails (3) to the inner support base section (4) as seen below in the illustration

and hand tighten the support rail (3) to bolt (1), washer (17) and nut (15). Repeat this step for the

opposing side of the support base (4).

8. Attach the upper section of the support rails (3) to the main post (2) using bolt (1), washer (17)

and nut (15).

9. Tighten all hardware after assembling all components in steps 5 to 8.