Product Manual

8
6. Attach the cross member (3) to the front leg (4) with bolt (5 and 6), washer (9), spring washer (8)
and nut (7).
7. Attach the main post assembly (1) with the cross member (3), with bolts (10), washers (13) spring
washer (11) and nuts (12). To do this slightly lift the front section of the main post assembly (1) to
align the hole on the frame to the hole on the cross member (3), then insert the pins (12) into the
corresponding aligned holes. To secure the pins insert the spring clip (21) into the hole of the pin.