Product Manual

Page 6 of 14
⚠CAUTION
CORD REEL USE AND CARE
 Do not force the cord reel. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
 Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
 Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
 To prevent serious injury or property damage, read and understand owner’s manual before use.
 Electric shock hazard. Do not use the cord reel in damp or wet conditions.
 For indoor use only.
 Exposure of skin directly to pressurized air or fluids could result in severe bodily injury.
 Ensure that only qualified electricians install or service this cord reel.
 Ensure that power supply voltage does not exceed maximum voltage rating of reel.
 Ensure that the reel is properly installed before connecting to power supply.
 Ensure that all electric power is removed from the cord reel before servicing.
 Check for frayed and broken wires before each use.
 When pulling electrical cable from the cord reel, always grasp the electrical cable itself, not the
work device.
 Remove the power from the reel immediately when any malfunction occurs.
 Never remove, tamper with, or cut the safety devices fitted by the manufacture.
 Not for use by or around children.