Product Manual

ManualsBrandsStrongway ManualsAlternative + Renewable EnergyPure Sine Wave Power Inverter — 1,000 Continuous Watts, Includes Cables and Remote Control

Page 5 of 16

#53068 Property

#53068 Specification

AC Output Frequency

58Hz - 62Hz

AC Output Waveform

Pure Sine Wave

USB Power Output

DC Output Voltage

5V DC, 500mA

DC Power Specification

DC Input Voltage Range

11V to 15V DC

Battery Drain Without AC Load

≤ 0.8A (at a 12V input)

Low Battery Shut-down Point (nominal)

10.5 ± 0.3V DC

High Battery Shut-down Point (nominal)

15.5 ± 0.5V DC

Efficiency (maximum)

85%

Physical Specifications

Ambient Operating Temperature Range

32°F to 104°F

Important Safety Information

⚠WARNING

 Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this tool. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

 Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

 Do not modify this product in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed.

 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. This

product will be safer and do a better job at the capacity for which it was intended. DO NOT use

this equipment for a purpose for which it was not intended.

 Industrial or commercial applications must follow OSHA requirements.

⚠WARNING

 This product may contain chemicals known to the State of California to cause cancer, birth defects

or other reproductive harm.

⚠WARNING

WORK AREA SAFETY

 Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas

may put you dangerously close to other cutting tools and rotating parts.

 Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence

of flammable liquids, gases, or dust. The product can create sparks, which may ignite the