Product Manual

Page 8 of 16
2. Using a screwdriver, pry the LEVER PLATE (Fig. 2) up and slip the bolt head under the notch in
the LEVER PLATE.
Fig. 2
3. Secure the HANDLE to the pallet jack with the three SPRING WASHERS and SCREWS (Fig. 1).
It is a good idea to remove any air bubbles that might have accumulated in the hydraulic system
during shipping.
Operating Instructions
⚠WARNING
 To avoid serious bodily injury or death, and/or property damage, do not exceed the rated load
capacity.
 When not in use, do not allow heavy loads to remain on the fork for an extended period of time.
Always lower the fork completely when not in use.
This pallet truck is designed for use with open style pallets or skids only. Closed style pallets must be
placed on top of the fork prior to use.
1. Insert the fork into the pallet.
2. To raise the fork, push the control lever all the way down, and pump the handle until the desired
fork height is reached.
3. To move the handle without affecting the fork setting, set the control lever in the center neutral
position. The load can now be pushed or pulled using the handle.
4. To lower the fork, pull the lever all the way up. Allow the load to descend slowly in a controlled
manner. The lever is spring-loaded and will return to the neutral position when released.