Product Manual

Page 6 of 16
 Be sure the load is secure and stable before moving.
 Do not operate a loaded pallet jack on ramps or inclines.
 Keep the load centered on the pallet jack.
 Wear steel-toed boots while operating the pallet jack.
 Check for damaged parts before operating. Do not operate a damaged or faulty pallet jack. Do not
attempt repairs unless you are trained or authorized to do so.
 Operate a pallet jack from a designated operating position. Keep hands, feet, and other body parts
clear from the lifting mechanism and under the forks of the pallet jack.
 Do not use the pallet jack to transport people or animals.
 Be sure the load is stable and secure before moving.
 Be sure to evenly distribute the load before moving.
 Be sure the length of the forks match the length of the pallet.
 Lower the forks to the lowest height when the pallet jack is not in use.
 For use on a hard, level surface. Do not use on a grade or angled surface.
 Do not use if the operator is not physically capable of safely operating with a full load.
 When lifting a pallet jack, the hydraulics may retract the wheels into the frame of the forks,
crushing fingers, feet, and other body parts.
 Do not place your hands on the side of the pallet jack while lifting. Always use the end of the forks
for lifting.
Assembly Instructions
⚠WARNING
 Do not adjust the nut unless the pallet truck doesn’t work properly.
 Do not loosen or over tighten the lock nut. The nut is pre-locked on the bolt at the factory. If this
lock nut is damaged or needs to be replaced, call customer service.