Product Manual

Page 6 of 12
horizontally mounted with the LEDs facing down.
 To be installed as a wall mount only.
Main Parts of Product
Reference
Subassembly
1
Glass lens
2
Driver
3
Housing
Installation Instructions
⚠WARNING
Be certain electrical power is off before and during installation and maintenance.
1. Loosen and remove the two M6 bolts, and then open the housing.
2. The wiring can be performed using a recessed junction box or a surface conduit. The light’s back
plate has a template that matches two standard junction box sizes. The conduit is connected
using the 1/2'' NPS tapped holes (A).