Product Manual

Page 5 of 12
⚠WARNING
PERSONAL SAFETY
 Stay alert, watch what you are doing, and use common sense when operating the light. Do not
use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating the tool may result in serious personal injury.
 Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
 Wear the proper personal protective equipment when necessary. Use ANSIZ87.1compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,
and hearing protection when appropriate. This applies to all persons in the work area.
⚠WARNING
ELECTRICAL SAFETY
 Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
⚠CAUTION
LIGHT USE AND CARE
 Check for damaged parts before each use. Carefully check that the light will operate properly and
perform its intended function. Replace damaged or worn parts immediately. Never operate the
light with a damaged part.
 Do not use a light with a malfunctioning switch. Any power tool that cannot be controlled with the
power switch is dangerous and must be repaired by an authorized service representative before
using.
 Disconnect the power supply from the product and place the switch in the locked or off position
before making any adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool accidentally.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠WARNING
 There is a risk of electric shock. Make sure that the power is off before installing or maintaining the
light.
 Check that voltage is compatible with the light driver and use approved connectors for all electrical
connections.
 Disconnect the light and allow cooling prior to servicing.
 This light is designed to operate in ambient temperatures ranging from -30℃ to 45℃ and can be