Product Manual
Page 4 of 12
Intended Use
The Strongway 45 Watt Industrial LED Wall-Mount Light provides security and general purpose
lighting in outdoor residential and commercial applications. Ideal applications include shipping and
receiving areas, garage exteriors, walkways, and parking areas.
Technical Specifications
Property
Specification
Hertz
50/60Hz
Voltage
100-277V
LED Chip
Philips
Driver
Input: 100-277V; output: 36V
Heat Sink
Aluminum Alloy Housing
Color Temperature
5000K
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this light. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the light until they have read this manual and have
developed a thorough understanding of how it works.
Do not modify this light in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the light in confined work areas may
put you dangerously close to other cutting tools and rotating parts.
Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the light.