45 Watt Industrial LED Wall-Mount Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 45 Watt Industrial LED Wall-Mount Light provides security and general purpose lighting in outdoor residential and commercial applications. Ideal applications include shipping and receiving areas, garage exteriors, walkways, and parking areas.
⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the light. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
horizontally mounted with the LEDs facing down. To be installed as a wall mount only. Main Parts of Product Reference 1 2 3 Subassembly Glass lens Driver Housing Installation Instructions ⚠WARNING Be certain electrical power is off before and during installation and maintenance. 1. Loosen and remove the two M6 bolts, and then open the housing. 2. The wiring can be performed using a recessed junction box or a surface conduit.
3. Prepare the back-plate for mounting by drilling out the two corners and centering the (5/16’’ diameter) holes (B). 4. If the wiring is performed using a recessed junction box then drill out the appropriate junction box holes. 5. Line up the back plate to the desired location and mount it securely. Use the supplied gaskets for a weather-tight seal between the back plate and the junction box. 6. Attach the driver input wires to the color matched supply wires. 7.
9. Fasten the front housing assembly to the back plate. Operation Instructions The light does not have or include a switch. Once it’s well-wired to a junction box, and the circuit is on, it will be controlled by a home switch. Before Using for the First Time ⚠WARNING Make sure the supply voltage is the same as the light’s rated voltage. Maintenance ⚠WARNING To avid personal injury, disconnect power to the light and allow the unit to cool down before performing any maintenance.
Maintenance Interval Maintenance Point Every year. Perform visual, mechanical, and electrical inspections. Periodically as needed. Clean the lens to ensure continued photometric performance. Clean the lens with a damp, non-abrasive, lint-free cloth. Do not use an abrasive, strong alkaline or acid cleaner, as damage may occur. Troubleshooting Failure Light does not work. Possible Cause Corrective Action Voltage is not correct. Incorrect wiring.
Parts List Part Number Part Description Quantity Remark 1 Screw 10 M4*8 2 Glass Cover Gasket 1 3 Glass Lens 1 4 Waterproof Ring 1 Silicone 5 Screw 10 M4*6 6 LED Chips 60 7 PCB Board 1 8 Housing 1 9 Screw 2 M6*16 10 O-ring 2 M6*16 11 Driver 1 12 Screw 4 13 Waterproof Gasket 1 14 Aluminum Cover 3 15 Driver Holder 1 M4*6 1/2'' Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only ("You'' or ''Your'') that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of five years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
