Product Manual

Page 8 of 13
Location of Solar Light
Solar powered lights require sunlight to recharge the internal batteries. For best results, place the light
in a position where it will receive direct sunlight, generally free from cover and shade.
Maintenance
Maintain the light by adopting a program of conscientious repair and maintenance in accordance with
the following recommended procedures.
Maintenance Interval
Maintenance Point
First Use
Allow the light to charge in the light for two sunny days.
Observe the light once installed for a day. Ensure that it is not
shaded at any time during daylight.
Observe the light once installed during the evening. Ensure
there is no alternate light source that will interfere with the
light’s sensors.
Seasonally
Visually inspect the solar panel and light to ensure both are
clear of debris and dirt.
Observe the light for one sunny day to ensure that as the
sun’s position changes, the solar panel is still receiving optimal
sunlight throughout the day.
During the Winter
Check the light. Ice should not be allowed to form on the solar
panel as freezing can damage waterproof seals.
Adjust the angle of the solar panel to the sun’s lower position.
This will maximize the amount of sunlight received and help
allow any water or snow that accumulates on the panel to slide
off.