Manualshelf

Product Manual

ManualsBrandsStrongway ManualsLightingMotion Sensor Security COB LED Solar Light — 500 Lumens, 50 LEDs
12345678910
Page 4 of 12
Intended Use
The Ironton Single COB LED Solar-Powered Motion Security Light delivers brilliant illumination and
the convenience of motion activation. Installation is easy with no wiring required, allowing you to place
this weather-proof light anywhere. Motion detected within a 40 foot range automatically triggers the
light. The amorphous solar panel charges the rechargeable battery even in low light conditions.
Technical Specifications
Property
Lumen
Number of LEDs
Motion Sensor Distance and Range
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the
product was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It
will be a safer experience and do the job better at the capacity for which it was intended. DO
NOT use this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the solar powered light in confined
work areas may put you dangerously close to other cutting tools and rotating parts.
Do not use the solar powered light where there is a risk of causing a fire or an explosion; e.g., in
the presence of flammable liquids, gases, or dust. The product can create sparks, which may
ignite the flammable liquids, gases, or dust.
Keep children and bystanders away from the work area while operating. Do not allow children to