Product Manual

Page 12 of 16
Before Each Use
Before installing the inverter, make sure the location meets the following conditions. This inverter has
a mounting bracket. To secure and fasten your inverter, please mount the inverter.
Dry
Don't drop or pour any liquid on the inverter.
Cool
Keep the inverter away from direct lighting.
Ventilate
Leave at least 2" of clearance around the inverter for air flow.
Make sure the ventilation openings are not obstructed.
Safe
Do not operate in the same compartment as stored
flammable liquids and gasoline.
Protect from
battery
gases
Do not operate the inverter where it will be exposed to battery
gases. Prolonged exposure can damage the inverter.
The inverter should be connected to 12 V power supply with the DC cables. We recommend that the
equipment or appliance switch be in the “OFF” position prior to plugging into the AC receptacle of the
inverter.
Operating Instructions
⚠WARNING
Before connecting, make sure the cables will be connected correctly. If the poles of the battery are
reversely connected, the inverter will be damaged and the warranty does not cover such damage.
1. Turn on the inverter.
2. Plug in AC appliances one at a time with the highest load first.
3. Before disconnecting the inverter from the battery, make sure the inverter is turned OFF.
Note: If connected to a vehicle battery, constant use of the inverter will greatly affect the life of the
battery. Most vehicle batteries are not designed for constant, deep discharge. If you plan to use the
inverter for frequent extended periods of time, consider using a separate battery for the inverter.