Product Manual

Page 7 of 16

Before Each Use

Always check for damages or worn-out parts before using the stacker. Broken parts will affect the

stacker’s operation. Replace or repair damaged or worn parts immediately.

Operating Instructions

⚠WARNING

Loads must be evenly distributed on the forks and never overload the forks. Always lock the

wheels when raising or lowering any loads.

Operating the Handle Trigger

 The Trigger Handle in lower (bottom) position is for raising the forks. Move the handle up and

down (pumping motion) to raise the forks to the desired height.

 The Trigger Handle in the middle (center) position puts the pallet jack in neutral. This position

is for moving the handle while pulling or pushing loads, and the forks will NOT move up or

down.