Product Manual
Page 6 of 16
Specific Operation Warnings
⚠WARNING
Do not exceed the rated load capacity.
Operate indoors, on a hard level surface.
Before moving, be sure load is centered and equally distributed on forks.
Lock wheels before raising or lowering loads.
NEVER exceed fork height of 19.5 inches when moving loads.
NEVER allow people to sit on or ride the stacker.
Do not use to transport people or animals.
Keep people, animals, and personal property clear from under the load.
keep bystanders away from stacker while in use.
Not for use by or around children.
Safety Labels
⚠WARNING
The stacker is NOT for human transportation. DO NOT move with a human standing on the forks. Any
part of the operator’s body should NEVER be placed under the cargo or load at any time.
Assembly
Attach each Straddle Leg (#7) to the Support Plate (#5) using two Hex Bolts (#6), two Washers
(#15), two Spring Washers (#16), and two Hex Nuts (#17). Attach the Support Bar (#14) to the
Support Plate (#5) and to the Straddle Leg (#7) using eight Hex Bolts (#13), eight Spring
Washers (#12), and eight Washers (#3). See diagram below.