Product Manual

Page 6 of 11
another tool. Never use an accessory that has a lower operating speed or operating pressure
than the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in
place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
 Risk of finger entrapment and laceration.
 Wear ANSI Z87.1 compliant protective goggles and equipment.
 Before use, fully deflate the tire.
 Ensure the wheel is stable and the work area if free and clear of debris.
 Secure and fully support any vehicles.
Assembly Instructions
⚠WARNING
 Always deflate tires before disassembling.
 Use the proper tools.
 Always be aware of the risk that there are always crushing hazards
 Lock the safety rods on the vehicle.
 The safety valve is set and sealed by the manufacturer. Do not tamper with it or change its
calibration.
 Follow all instructions to avoid injury to people or damages to objects and surroundings.
Before Each Use
⚠WARNING
 Before the bead breaker is used, carefully inspect the unit each time for damages, or any missing,
worn, or loose parts.
 Explosion hazard. Deflate tire before removing a wheel, rim, or part of a rim clamp or nut.
Connect a hydraulic pump (manual or air) to the bead breaker through the quick-couplers. If you use
an air/hydraulic pump, you must connect it to a source of compressed air of 100-120 PSI.
Test the bead breaker before you attach it to the rim. Release all air from the tire. Remove the cap
and valve and the valve extension that’s included. Verify that the tire is completely deflated!