Product Manual

16
TO ADD OIL TO HYDRAULIC PUMP UNIT:
After extensive use, the hydraulic oil supply should be replaced to ensure longer equipment life.
1. Set Pump Unit upright on a level surface.
2. Remove the Screw with its attached dipstick.
3. Add 0.24 Qts (approximately 7.68oz./ 220ml) of oil. The oil level should be near position A.
Use a high grade anti-foaming hydraulic oil.
KEEP DIRT AND OTHER MATERIALS CLEAR WHEN POURING.
4. Replace the Oil Fill Screw.
5. Perform the Air Purge Procedure.
TO REPLACE OIL TO HYDRAULIC PUMP UNIT :