Product Manual

6. When the damaged area has been bent to the desired position, slowly turn the Release Valve on the

Pump Unit in a counterclockwise direction to release the hydraulic pressure and cautiously remove

the Hydraulic Ram.

Example: To Repair Sheet Metal Damage

1. Determine which direction the body panel should be moved.

2. Remove any obstructions that could be damaged or are in the way.

3. Connect the appropriate attachments to the Hydraulic Ram.

Note: When repairing larger body panel dents such as a piece of sheet metal, dented door, fender or

suggested use is the Rubber Head.

4. Attachment must also be in line with the direction in which the damaged area needs to be pushed. A

hard secure surface will be required for to apply pressure on opposing sides.

 A block of wood or a towel may be used to protect the sheet metal.