Manualshelf

Product Manual

ManualsBrandsStrongway ManualsAutomotiveHydraulic Engine Hoist with Load Leveler — 2-Ton Capacity, 1in.–82 5/8in. Lift Range
11121314151617181920
15
RAISING THE CRANE
1. Block the vehicle’s wheels for lifting stability. Secure the load to prevent inadvertent shifting and
movement
2. Position the crane near desired lift point.
3. Set the Parking Brake in the vehicle.
4. Close the release valve by turning it clockwise until it is firmly closed.
5. Before raising the load double check and verify the load is centered and also has full contact with
the lifting point.
6. Pump handle to lift load. Continue to pump the long ram handle to raise the load to the desired
height. After lifting, support the load appropriately.
CAUTION: NEVER WIRE, CLAMP OR OTHERWISE DISABLE THE LIFT CONTROL
VALVE TO FUCTION BY ANY MEANS OTHER THAN BY USING THE OPERATOR'S HAND. USE
THE HANDLE PROVIDED WITH THIS PRODUCT OR AN AUTHORIZED REPLACEMENGT
HANDLE TO ENSURE PROPER RELEASE VAVLE OPERATION. DO NOT USE EXTENSIONS ON
ANY AIR HOSE OR ON THE OPERATING HANDLE.