Product Manual

Page 6 of 9
Specific Operation Warnings
⚠WARNING
 Do not exceed the rated load capacity.
 Use on a flat, hard, level surface.
Assembly Instructions
1. Connect the two-piece side frames and one-piece central frame with the connect plates and bolts,
creating one long frame.
2. Repeat step 1 to build another long frame.
3. Connect the two-piece long frame with the three-piece cross tube and bolts, creating the drum
rack.
4. Tighten all the bolts.
Operating Instructions
Place the drums on the rack for storage.
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
After daily use
Clean the product with a dry and soft cloth.
When not in use
Store the product in a dry place out of direct sunlight.