3-Drum Rack Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This drum rack is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Strongway 3-Drum Rack is designed for stacking steel drums horizontally. The all-steel construction and heavy-duty design, allows fork truck entry from all four sides and can be safely stacked four units high. Welded and bolted assembly is included in the hardware. Packaging Contents Part A (37) Central Frame (2) Side Frame (4) Connect Plate (8) Cross Tube (3) Bolt Set (20) Technical Specifications Property Capacity (lb.) Capacity (gal.) Dimensions (in.
Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product.
Specific Operation Warnings ⚠WARNING Do not exceed the rated load capacity. Use on a flat, hard, level surface. Assembly Instructions 1. Connect the two-piece side frames and one-piece central frame with the connect plates and bolts, creating one long frame. 2. Repeat step 1 to build another long frame. 3. Connect the two-piece long frame with the three-piece cross tube and bolts, creating the drum rack. 4. Tighten all the bolts. Operating Instructions Place the drums on the rack for storage.
Parts Diagram Parts List Reference 1 2 3 4 5 Part Number 1 2 3 4 5 Part Description Central Frame Side Frame Connect Plate Cross Tube Bolt Set Quantity 2 4 8 3 20 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
